bicycle fenders

This bicycle fender is made of PP thermoplastic resin, which is soft and flexible, and will not break when folded, making you ride more smoothly in rain and cement water. Surface can be painted.


Product Detail

Product Tags

Product Introduction

When you ride on rainy days or muddy roads, this bicycle fender can effectively isolate rainwater, mud and stones, and you don't have to worry about getting your clothes dirty and your tires damaged.

This bicycle fender is made of PP thermoplastic resin, which is very soft. So it has good flexibility and won't break when folded.

More importantly, this bicycle fender can be painted in any pattern you like, making the whole fender look cool. Dress up your car with fenders like this and make you the prettiest guy on the street while riding.

图片1
图片2

Details

Material PP
Dimension 28X26.5cm
Weight About 25g
Color Customized
Logo Customized
Packaging 1 fender and 6 cable ties

Note

1. Please allow an error of 1 ~ 3 mm for manual measurement, thank you.

2. Due to the differences between different monitors, the pictures may not reflect the actual colors of the items. We guarantee that the style is the same as shown in the drawing.

图片4

Technical Service Instructions

Use fender

Installed on the front fork shoulder can be well protected before the inner tube is at least the fork sand hit, prevent scratches in the tube.

Mud and rain stops can effectively stop the splash to prevent mud, rain, goggles, guarantee clear vision improve the odds.  

Mounted on the rear fork to withstand the sand and the rear wheel.

Can also effectively block the fly splash debris after reaching the liner and turn point.

Fender installation

1. Front fork bridge fender installation

The four hole is fixed on the front fork bucket with tie on, two holes are fixed on the fork bridge.

2.The front wheel fender installation

Four holes are fixed on the rear fork of the bicycle frame,

Two holes are fixed on the frame of the fork to strengthen them.

3.Installation experience

The first tie with all pre fixed, and then slowly tighten,

Determine the final location, and then tighten.


  • Previous:
  • Next:

  • Write your message here and send it to us